山东鼎胜制冷设备有限公司
地址:济南天桥区粟山路泉利重配城
全国咨询热线:400-096-6610
电话:0531-85968762
手机:13075373251
联系人:邓老师
当前位置:首页-新闻资讯-公司动态
公司动态
冷库油压调节阀失灵的解决方案
2017-11-15 17:49:44

1、制冷能力不足问题分析及解决方案:

1, insufficient refrigeration capacity analysis and solutions:

① 吸气过滤器阻塞, 吸气压力丢失过大, 使吸气压力降低, 容积功率降低: 拆下吸气过滤器的过滤网清洁。

The suction filter is blocked, the suction pressure is lost too much, the suction pressure is reduced, and the volume power is reduced: the filter net of the suction filter is cleaned.

② 滑阀的方位不合适或其它毛病: 查看指示器并调整方位维修滑阀。

The position of the slide valve is not suitable or other faults: view the indicator and adjust the azimuth maintenance spool valve.

③ 机器不正常的磨损, 形成问隙过大: 调整或替换零件。

Machine abnormal wear, forming too large gap: adjust or replace parts.

④ 吸气压力低于蒸腾压力: 查看阀门 ( 如吸气截止阀或止回阀等 )

The inspiratory pressure is lower than the transpiration pressure: check the valve (such as suction stop valve or check valve, etc.)

⑤ 高低压体系间走漏; 查看开车、泊车所用的旁通管路。

The high and low voltage system leakage; bypass pipeline for driving and parking view.

山东冷库造价多少钱

⑥ 喷油量缺乏, 不能实现密封效果: 查看安全阀是否密封, 查看油路、油泵、油过滤器, 进步油量。

The injection quantity deficiency, can not achieve the sealing effect: check whether the safety valve seal, check the oil, oil pump, oil filter, oil production progress.

⑦ 机器排气压力远高于冷凝压力, 容积功率降低: 查看排气体系管路及阀门, 铲除排气体系的阻力。如体系进入空气应予以扫除。

The machine exhaust pressure is much higher than the condensing pressure, reduce the volume of power: check the pipeline and the valve exhaust system, exhaust system to eradicate resistance. If the system enters the air, it should be swept away.

2、润滑油油压出现的问题及解决方案:

2, lubricating oil pressure problems and solutions:

① 各轴间隙过大或部分油路漏油:查看修补。

Each shaft clearance is too large or part of the oil leakage: check repair.

③ 油泵问隙过大、磨损: 查看修补或替换。

Pump clearance is too large, wear: check, repair or replace.

④ 曲轴箱油量缺乏:增加润滑油。

The crankcase oil content is insufficient: increase the lubricating oil.

⑤ 吸油过滤网阻塞:拆下清洁。

Oil filter screen blockage: remove the clean.

⑥ 油压调节阀失灵::查看修补。

The oil pressure regulating valve failure: check repair.

以上便是山东冷库造价今天的分享,您还满意吗,欢迎关注我们的网站:http://www.sddslk.com并且关注我们的产品,我们将为您提供优良的产品,衷心的愿与您建立合作关系

The above is the Shandong cold storage cost sharing today, you are satisfied with it, welcome to pay attention to our website: http://www.sddslk.com and pay attention to our products, we will provide you with good products, sincerely willing to establish a cooperative relationship with you

在线咨询